Sains Malaysiana 52(6)(2023): 1845-1854

http://doi.org/10.17576/jsm-2023-5206-19

 

The Effect of Liquid Smoke Treatment on Physical Stability and Impact Toughness Chicken Feather Fibre (CFF) as Reinforcement in Composites

(Kesan Rawatan Asap Cecair terhadap Kestabilan Fizikal dan Keliatan Impak Gentian Bulu Ayam (CFF) sebagai Pengukuhan dalam Komposit)

 

MUKHLIS MUSLIMIN1,*, SALEH2, AHMAD SENG1, WILLY ARTHA WIRAWAN3, MOHAMMAD MUZNI HARBELUBUN1, SANDI RAIS1 & MUHAMMAD ALFAJRI ISHAM4

 

1Mechanical Engineering Department, Universitas Khairun, Yusuf Abdurrahman Street, Ternate 97719, Indonesia

2Department of Chemistry, Universitas Khairun, Yusuf Abdurrahman Street, Ternate 97719, Indonesia

3Indonesian Railway Polytechnic, Tirta Raya Street, Madiun 63161, Indonesia

4Student of Mechanical Engineering Department, Universitas Khairun, Yusuf Abdurrahman Street, Ternate 97719 Indonesia

 

Received: 15 April 2023/Accepted: 1 June 2023

           

Abstract

The objective of this study was to determine the effect of liquid smoke treatment on chicken feather fibres (CFF) on the morphology and impact toughness of composites reinforced with CFF. The experiment was carried out by measuring the density of CFF, followed by immersion in liquid smoke for 1, 2, and 3 hours. All of the fibers, including one without the immersion treatment, were then inserted into the oven at a temperature of 40 °C for 30 min. The morphological assessments were done using a scanning electron microscope (SEM) and the impact test according to the ASTM D5942-96 standard on the Charpy method impact tester. The SEM results showed that the fibers without immersion had a multitude of impurities at the surface, while with immersion treatment, the fibers had a more clean and rough surface. Impact test results showed that the fiber-reinforced composite without treatment was 61,583 Kj/m2, while the fiber-reinforced composite with immersion treatment for 1, 2, and 3 hours increased by 63,894 Kj/m2, 71,061 Kj/m2, and 80,538 Kj/m2. Treatment for 3 hours significantly increased the strength of the composite by 30.78%.

 

Keywords: CFF; composite; impact toughness; liquid; morphology

 

Abstrak

Objektif kajian ini adalah untuk menentukan kesan rawatan asap cecair ke atas gentian bulu ayam (CFF) terhadap morfologi dan keliatan impak komposit yang diperkuat dengan CFF. Uji kaji dijalankan dengan mengukur ketumpatan CFF, diikuti dengan rendaman dalam asap cecair selama 1, 2 dan 3 jam. Semua gentian, termasuk satu tanpa rawatan rendaman dimasukkan ke dalam relau pada suhu 40 °C selama 30 minit. Penilaian morfologi dilakukan menggunakan mikroskop elektron pengimbasan (SEM) dan ujian impak mengikut piawaian ASTM D5942-96 pada penguji impak kaedah Charpy. Keputusan SEM menunjukkan bahawa gentian tanpa rendaman mempunyai banyak kekotoran pada permukaan, manakala dengan rawatan rendaman, gentian mempunyai permukaan yang lebih bersih dan kasar. Keputusan ujian impak menunjukkan komposit bertetulang gentian tanpa rawatan ialah 61,583 Kj/m2, manakala komposit bertetulang gentian dengan rawatan rendaman selama 1, 2 dan 3 jam meningkat sebanyak 63,894 Kj/m2, 71,061 Kj/m2 dan 80,538 Kj/m2. Rawatan selama tiga jam dengan ketara meningkatkan kekuatan komposit sebanyak 30.78%.

 

Kata kunci: Cecair; CFF; keliatan kesan; komposit; morfologi

 

REFERENCES

Acda, M.N. 2010. Sustainable use of waste chicken feather for durable and low cost building materials for tropical climates. In Sustainable Agriculture: Technology, Planning and Management, edited by Salazar, A. & Rios, I. Nova Science Publishers, Inc. pp. 353-366.

Akil, H.M., Omar, M.F., Mazuki, A.A.M., Safiee, S., Ishak, Z.A.M. & Abu Bakar, A. 2011. Kenaf fiber reinforced composites: A review. Materials & Design 32(8): 4107-4121. https://doi.org/https://doi.org/10.1016/j.matdes.2011.04.008

Bansal, G. & Singh, V.K. 2016. Review on chicken feather fiber (CFF) a livestock waste in composite material development. International Journal of Waste Resources 6: 4. https://doi.org/10.4172/2252-5211.1000254

Cheng, S., Lau, K., Liu, T., Zhao, Y., Lam, P.M., & Yin, Y. 2009. Mechanical and thermal properties of chicken feather fiber/PLA green composites. Composites Part B: Engineering 40(7): 650-654. https://doi.org/https://doi.org/10.1016/j.compositesb.2009.04.011

Choudary, R.B., Burri, M., Srinath, R. & Alex, R. 2019. Novel use of waste chicken feather fiber for making prototype non-woven mats and their evaluation. IOP Conference Series: Materials Science and Engineering 653(1): 012020. https://doi.org/10.1088/1757-899X/653/1/012020

Kamarudin, S.H., Mohd Basri, M.S., Rayung, M., Abu, F., Ahmad, S., Norizan, M.N., Osman, S., Sarifuddin, N., Mat Desa, M.S.Z., Abdullah, U.H., Mohamed Amin Tawakkal, I.S. & Abdullah, L.C. 2022. A review on natural fiber reinforced polymer composites (NFRPC) for sustainable industrial applications. Polymers 14(17): 1-36. https://doi.org/10.3390/polym14173698

Mukhlis, M., Hardi, W. & Mustafa, R. 2021. The effect of treatment of coconut fiber with liquid smoke on mechanical properties of composite. E3S Web of Conferences 328: 07010. https://doi.org/10.1051/e3sconf/202132807010

Muslimin, M., Kamil, K. & Wardana, I.N.G. 2021. Cross-sectional texture of sago fiber due to liquid smoke treatment. IOP Conference Series: Materials Science and Engineering 1125(1): 012114. https://doi.org/10.1088/1757-899x/1125/1/012114

Muslimin, M., Rahim, M., Seng, A. & Rais, S. 2022. Liquid smoke treatment for natural fibers: The effect on tensile properties, surface morphology, crystalline properties, and functional groups of banana stem fibers. Applied System Innovation 5(94): 1-12. https://doi.org/https://doi.org/10.3390/asi5050094

Muslimin, M., Kamil,  K., Budi, S.A.S. & Wardana, I.N.G. 2019a. Effect of liquid smoke on surface morphology and tensile strength of sago fiber. Journal of Mechanical Engineering and Sciences 13(4): 6165-6177. https://doi.org/https://doi.org/10.15282/jmes.13.4.2019.27.0483

Muslimin, M., Budi, S.A.S., Wardana, I.N.G. & Kamil, K. 2019b. Liquid smoke potential solution on texture and bonding sago fiber-matrix. IOP Conference Series: Materials Science and Engineering 494: 012029. https://doi.org/10.1088/1757-899X/494/1/012029

Palungan, M.B. & Muslimin, M. 2022. Tension strength and fiber morphology of agave cantala roxb leaves due to liquid smoke immersion treatment. Advances in Materials Science and Engineering 2022: 4653384.

Prabangkara, R.L., Tuymuratovna, I.D., Sudjianto, A.T. & Suraji, A. 2022. Analysis of volume fraction and fiber orientation on tensile strength and impact strength of cannabis sativa-polyester fiber composites. Asian Journal Science and Engineering 1(1): 12. https://doi.org/10.51278/ajse.v1i1.395

Rajole, S., Ravishankar, K.S. & Kulkarni, S.M. 2020. Performance study of jute-epoxy composites/sandwiches under normal ballistic impact. Defence Technology 16(4): 947-955. https://doi.org/10.1016/j.dt.2019.11.011

Ramakrishnan, N., Sharma, S., Gupta, A. & Alashwal, B.Y. 2018. Keratin based bioplastic film from chicken feathers and its characterization. International Journal of Biological Macromolecules 111: 352-358. https://doi.org/https://doi.org/10.1016/j.ijbiomac.2018.01.037

Reddy, N. & Yang, Y. 2007. Structure and properties of chicken feather barbs as natural protein fibers. Journal of Polymers and the Environment 15(2): 81-87. https://doi.org/10.1007/s10924-007-0054-7

Rizal, W.A., Nisa, K., Maryana, R., Prasetyo, D.J., Pratiwi, D., Jatmiko, T.H., Ariani, D. & Suwanto, A. 2020. Chemical composition of liquid smoke from coconut shell waste produced by SME in Rongkop Gunungkidul. IOP Conference Series: Earth and Environmental Science 462(1): 012057. https://doi.org/10.1088/1755-1315/462/1/012057

Sepe, R., Bollino, F., Boccarusso, L. & Caputo, F. 2018. Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites. Composites Part B: Engineering 133: 210-217. https://doi.org/10.1016/j.compositesb.2017.09.030

Tesfaye, T., Sithole, B. & Ramjugernath, D. 2017. Valorisation of chicken feathers: A review on recycling and recovery route - Current status and future prospects. Clean Technologies and Environmental Policy 19(10): 2363-2378. https://doi.org/10.1007/s10098-017-1443-9

Tesfaye, T., Sithole, B., Ramjugernath, D. & Mokhothu, T. 2018. Valorisation of chicken feathers: Characterisation of thermal, mechanical and electrical properties. Sustainable Chemistry and Pharmacy 9: 27-34. https://doi.org/https://doi.org/10.1016/j.scp.2018.05.003

Wirawan, W.A. 2017. Surface modification with silane coupling agent on tensile properties of natural fiber composite. Journal of Energy, Mechanical, Material and Manufacturing Engineering 2(2): 98-105. https://doi.org/10.22219/jemmme.v2i2.5053

Wirawan, W.A., Choiron, M.A., Siswanto, E. & Dwi, T. 2020. Analysis of the fracture area of tensile test for natural woven fiber composites (hibiscus tiliaceus-polyester). Journal of Physics: Conference Series 1700: 012034. https://doi.org/10.1088/1742-6596/1700/1/012034

Wirawan, W.A., Choiron, M.A., Siswanto, E. & Widodo, T.D. 2022. Morphology, structure, and mechanical properties of new natural cellulose fiber reinforcement from waru (Hibiscus tiliaceus) bark. Journal of Natural Fibers19(15): 12385-12397. https://doi.org/10.1080/15440478.2022.2060402

Wirawan, W.A., Sabitah, A., Choiron, M.A., Muslimin, M., Zulkarnain, A. & Budiarto, B.W. 2023. Effect of chemical treatment on the physical and thermal stabillity of Hibiscus tiliaceus bark fiber (HBF) as reinforcement in composite. Results in Engineering 18(April): 101101. https://doi.org/10.1016/j.rineng.2023.101101

Zhang, B., Jia, L., Tian, M., Ning, N., Zhang, L. & Wang, W. 2021. Surface and interface modification of aramid fiber and its reinforcement for polymer composites: A review. European Polymer Journal 147: 110352. https://doi.org/https://doi.org/10.1016/j.eurpolymj.2021.110352

 

*Corresponding author; email: mukhlis@unkhair.ac.id

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

previous