Sains Malaysiana 42(9)(2013): 1301–1310

 

Hydraulic Performance of Free Surface Breakwaters: A Review

(Prestasi Hidraulik Pemecah Ombak Permukaan Bebas: Suatu Tinjauan)

 

H.M. Teh*

Civil Engineering Department, University Teknologi PETRONAS, Bandar Seri Iskandar

31750 Tronoh, Perak, Malaysia

 

Diserahkan: 13 Ogos 2012 /Diterima: 25 Januari 2013

 

 

ABSTRACT

This paper introduces the concept of free surface breakwaters for coastal protection. The advantages, limitations and applications of these breakwaters are discussed. Based on their configurations, free surface breakwaters have been classified into four types, namely solid-type, plate-type, caisson-type and multipart-type. Typical designs of the respective breakwater types are presented and the hydraulic characteristics are reviewed. In addition, comparisons of hydraulic efficiency of some of the free surface breakwaters are also addressed in this paper.

 

Keywords: Energy dissipation; free surface breakwater; wave attenuation; wave reflection

 

ABSTRAK

Kertas penyelidikan ini memperkenalkan konsep pemecah ombak permukaan bebas untuk perlindungan pantai. Kelebihan, batasan dan aplikasi bagi pemecah ombak dibincangkan. Pemecah ombak permukan bebas ini telah dikelaskan berdasarkan kepada empat jenis, iaitu jenis konfigurasi jasad, jenis plat, jenis caisson dan jenis berbilang-bahagian. Reka bentuk pemecah ombak yang tipikal masing-masing dibentangkan dan ciri-ciri hidraulik dikaji. Di samping itu, perbandingan kecekapan hidraulik bagi beberapa jenis pemecah ombak permukan bebas juga disertakan dalam kertas ini.

 

Kata kunci: Pantulan ombak; pelesapan tenaga; pemecah ombak permukaan bebas; pengecilan ombak

RUJUKAN

Brossard, J., Jarno-Druaux, A., Marin, F. & Tabet-Aoul, E.H. 2003. Fixed absorbing semi-immersed breakwater. Coastal Engineering 49(1-2): 25-41.

Dattatri, J., Shanker, N.J. & Rahman, H. 1977. Laboratory investigations of submerged platform breakwaters. Proceedings of the 17th Congress of the IAHR 4: 89-96.

Duclos, G., Josset, C., Clement, A.H., Gentaz, L. & Colmard, C. 2004. Hydrodynamic efficiency of a new design of half-submerged breakwater compared to a rectangular caisson. Journal of Waterway, Port, Coastal and Ocean Engineering 130(3): 127-133.

Gűnayd?n, K. & Kebdaşl?, M.S. 2004. Performance of solid and perforated U-type breakwaters under regular and irregular waves. Ocean Engineering 31(11-12): 1377-1405.

Gűnayd?n, K. & Kebdaşl?, M.S. 2007. Investigation of P-type breakwater performance under regular and irregular waves. Ocean Engineering 34(7): 1028-1043.

Hattori, M. 1975. Wave transmissions from horizontal perforated plates. Proceedings of the 22nd Conference on Coastal Engineering.

Hsiao, S.S., Fang, H.M., Chang, C.M. & Lee, T.S. 2008. Experimental study of the wave energy dissipation due to the porous-piled structure. Proceedings of the 18th International Offshore and Polar Engineering Conference: pp. 592-598.

Hsu, H.H. & Wu, Y.C. 1999. Scattering of water wave by a submerged horizontal plate and a submerged permeable breakwater. Ocean Engineering 26(4): 325-341.

Hu, H., Wang, K.H. & Williams, A.N. 2002. Wave motion over a breakwater system of a horizontal plate and a vertical porous wall. Ocean Engineering 29(4): 373-386.

Isaacson, M., Whiteside, N., Gardiner, R. & Hay, D. 1995. Modelling of a circular-section floating breakwater. Canadian Journal of Civil Engineering 22: 714-722.

Koftis, T. & Prinos, P. 2005. 2DV hydrodynamics of a catamaran-shaped floating structure. IASME Transactions 7(2): 1180- 1189.

Koutandos, E. & Prinos, P. 2005. Design formulae for wave transmission behind floating breakwaters. Proceedings of the IAHR XXXI Congress: pp. 4081-4089.

Koutandos, E.V. 2007. Hydrodynamic analysis of a skirt breakwater. Proceedings of the ICE: Maritime Engineering 160: 121-133.

Koutandos, E.V. & Prinos, P.E. 2011. Hydrodynamic characteristics of semi-immersed breakwater with an attached porous plate. Ocean Engineering 38(1): 34-48.

Li, D., Panchang, V., Tang, Z., Demirbilek, Z. & Ramsden, J. 2005. Evaluation of an approximate method for incorporating floating docks in harbor wave prediction models. Canadian Journal of Civil Engineering 32: 1082-1092.

Liu, Y., Li, Y.C., Teng, B., Jiang, J. & Ma, B. 2008. Total horizontal and vertical forces of irregular waves on partially perforated caisson breakwater. Coastal Engineering 55(6): 537-552.

Neelamani, S. & Vedagiri, M. 2002. Wave interaction with partially immersed twin vertical barriers. Ocean Engineering 29(2): 215-238.

Neelamani, S. & Gayathri, T. 2006. Wave interaction with twin plate wave barrier. Ocean Engineering 33(3-4): 495-516.

Neelamani, S. & Rajendran, R. 2002a. Wave interaction with ‘^’-type breakwaters. Ocean Engineering 29(5): 561-589.

Neelamani, S. & Rajendran, R. 2002b. Wave interaction with T-type breakwaters. Ocean Engineering 29(2): 151–175.

Neelamani, S. & Reddy, M.S. 1992. Wave transmission and reflection characteristics of a rigid surface and submerged horizontal plate. Ocean Engineering 19(4): 327-341.

Patarapanich, M. 1984. Maximum and zero reflection from submerged plate. Journal of Waterway, Harbors, Coast and Ocean Engineering 110(2): 171-181.

Patarapanich, M. & Cheong, H.F. 1989. Reflection and transmission characteristics of regular and random waves from a submerged horizontal plate. Coastal Engineering 13(2): 161-182.

Rao, S., Shirlal, K.G., Varghese, R.V. & Govindaraja, K.R. 2009. Physical model studies on wave transmission of a submerged inclined plate breakwater. Ocean Engineering 36(15-16): 1199-1207.

Sundar, V. & Subba Rao, B.V.V. 2002. Hydrodynamic pressure and forces on quadrant front face pile supported breakwater. Ocean Engineering 29(2): 193-214.

Sundar, V. & Subba Rao, B.V.V. 2003. Hydrodynamic performance characteristics of quadrant front-face pile-supported breakwater. Journal of Waterway, Port, Coastal and Ocean Engineering 129(1): 22-33.

Teh, H.M., Venugopal, V. & Bruce, T. 2010. Hydrodynamic performance of a free surface semicircular perforated breakwater. Proceedings of the 32nd International Conference on Coastal Engineering, Shanghai, China.

Teh, H.M., Venugopal, V. & Bruce, T. 2011. Performance analysis of a semicircular free surface breakwater. Proceedings of the 30th International Conference on Ocean, Offshore and Arctic Engineering, Rotterdam, The Netherlands.

Teh, H.M., Venugopal, V. & Bruce, T. 2012. Hydrodynamic characteristics of a free surface semicircular breakwater exposed to irregular waves. Journal of Waterway, Port, Coastal and Ocean Engineering 138(2): 149-163.

Tsay, T.K. & Liu, P.L.F. 1983. A finite element model for wave refraction and diffraction. Applied Ocean Research 5(1): 30-37.

Usha, R. & Gayathri, T. 2005. Wave motion over a twin-plate breakwater. Ocean Engineering 32(8-9): 1054-1072.

Wang, Y., Wang, G. & Li, G. 2006. Experimental study on the performance of the multiple-layer breakwater. Ocean Engineering 33(13): 1829-1839.

 

 

  *Pengarang untuk surat-menyurat; e-mail: heemin.teh@petronas.com.my

 

 

sebelumnya